Cisco SF200-24FP
Liên hệ
Giá trên đã bao gồm VAT
Bảo hành: tháng
Thông số kỹ thuật:
Product Name Cisco SF200-24FP 24-port 10/100 Full-PoE Smart Switch
Manufacturer Part Number SF200-24FP-EU
Product Series Cisco 200 Series Smart Switches Cisco Small Business
Product Model SF200-24FP
Product Type Ethernet Switch
Interfaces/Ports
Total System Ports 24 Fast Ethernet 2 Gigabit Ethernet
RJ-45 Ports 24 Fast Ethernet
Combo Ports (RJ-45 + SFP) 2 Gigabit Ethernet combo
Each combo mini-GBIC port has one 10/100/1000 Ethernet port and one mini-GBIC/SFP Gigabit Ethernet slot, with one port active at a time.
Performance
Switching capacity 8.8 Gbps
Forwarding rate 6.55 mpps
Layer 2 Switching
Spanning Tree Protocol (STP) Standard 802.1d STP support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Port grouping "Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
● Up to 4 groups
● Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation"
Xem thêm
Thông tin về sản phẩm
Siêu Việt cam kết
- 100% sản phẩm chính hãng
- 100% giá cạnh tranh so với thị trường
- Giao hàng nhanh 2h và miễn phí giao hàng từ 500.000đ
- Ưu đãi vàng dành cho doanh nghiệp
- Đổi mới sản phẩm lên đến 30 ngày
- Dịch vụ bảo hành chuyên nghiệp uy tín
Sản phẩm đi kèm
GIỚI THIỆU
| Thông số kỹ thuật của Switch Cisco SF200-24FP | |
| General Information | |
| Product Name | Cisco SF200-24FP 24-port 10/100 Full-PoE Smart Switch |
| Manufacturer Part Number | SF200-24FP-EU |
| Product Series | Cisco 200 Series Smart Switches Cisco Small Business |
| Product Model | SF200-24FP |
| Product Type | Ethernet Switch |
| Interfaces/Ports | |
| Total System Ports | 24 Fast Ethernet 2 Gigabit Ethernet |
| RJ-45 Ports | 24 Fast Ethernet |
| Combo Ports (RJ-45 + SFP) | 2 Gigabit Ethernet combo |
| Each combo mini-GBIC port has one 10/100/1000 Ethernet port and one mini-GBIC/SFP Gigabit Ethernet slot, with one port active at a time. | |
| Performance | |
| Switching capacity | 8.8 Gbps |
| Forwarding rate | 6.55 mpps |
| Layer 2 Switching | |
| Spanning Tree Protocol (STP) | Standard 802.1d STP support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default |
| Port grouping | Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) ● Up to 4 groups ● Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation |
| VLAN | Support for up to 256 VLANs simultaneously (out of 4096 VLAN IDs). Port-based and 802.1Q tag-based VLANs |
| Voice VLAN | Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS |
| Internet Group Management Protocol (IGMP) versions 1 and 2 snooping | IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups |
| Head-of-line (HOL) blocking | HOL blocking prevention |
| Security | |
| IEEE 802.1X (Authenticator role) | 802.1X: RADIUS authentication, MD5 hash |
| Port security | Locks MAC addresses to ports, and limits the number of learned MAC addresses |
| Storm control | Broadcast, multicast, and unknown unicast |
| DoS prevention | DoS attack prevention |
| Quality of Service | |
| Priority levels | 4 hardware queues |
| Scheduling | Strict priority and weighted round-robin (WRR) Queue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS) |
| Class of service | Port based, 802.1p VLAN priority based, IPv4/v6 IP precedence/type of service (ToS)/DSCP based, Differentiated Services (DiffServ) |
| Rate limiting | Ingress policer, per VLAN and per port |
| IPv6 applications | Web, ping, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), RADIUS, syslog, DNS client |
| Management | |
| Web user interface | Built-in switch configuration utility for easy browser-based device configuration (HTTP). Supports configuration, system dashboard, system maintenance, and monitoring |
| Simple Network Management Protocol (SNMP) | SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 user-based security model (USM) |
| Remote Monitoring (RMON) | Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis |
| IPv4 and IPv6 dual stack | Coexistence of both protocol stacks to ease migration |
| Firmware upgrade | Web browser upgrade (HTTP) and TFTP |
| Port mirroring | Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 4 source ports can be mirrored to one destination port. A single session is supported |
| VLAN mirroring | Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 4 source VLANs can be mirrored to one destination port. A single session is supported |
| Dynamic Host Configuration Protocol (DHCP) (options 66 and 67) | (DHCP) options facilitate tighter control from a central point (DHCP server) to obtain IP address and perform auto-configuration (with configuration file download) |
| Text-editable config files | Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment |
| Smartports | Simplified configuration of QoS and security capabilities |
| Auto Smartports | Automatically applies the intelligence delivered through the Smartports roles to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero touch deployments. |
| Cloud services | Support for FindIT Network Discovery Utility and Cisco Active Advisor |
| Localization | Localization of GUI and documentation into multiple languages |
| Other management | HTTP, RADIUS, port mirroring, TFTP upgrade, DHCP client, BOOTP, SNTP, ping, syslog |
| Power Efficiency | |
| Energy Detect mode | Automatically turns off power on Gigabit Ethernet RJ-45 port when the switch detects a link down Active mode is resumed without loss of any packets when the switch detects that the link is back up |
| Cable length detection | Adjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter than 10 m. |
| Other specifications | |
| MAC table | Up to 8,000 MAC addresses |
| Bonjour | The switch advertises itself using the Bonjour protocol |
| Power over Ethernet (PoE) | |
| Power Dedicated to PoE | 180W |
| Number of Ports That Support PoE | 24 |
| Cabling type | Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5 Ethernet or better for 1000BASE-T |
| Flash Memory | 16 MB |
| CPU memory | 128 MB |
| Packet buffer: All numbers are aggregate across all ports, as the buffers are dynamically shared: |
8 MB |
| Dimensions (W x H x D) (mm) | 440 x 44 x 257 |
| Unit weight (kg) | 3.67 |
| Power | 100V-240V 47-63 Hz, internal, universal |
| Certification | UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
| Operating temperature | 32° to 122°F (0° to 50°C) |
| Storage temperature | –4° to 158°F (–20° to 70°C) |
| Operating humidity | 10% to 90%, relative, noncondensing |
| Storage humidity | 10% to 90%, relative, noncondensing |
| Package Contents | ● Cisco 200 Series Smart Switch ● Power cord (power adapter for 8-port and 10-port SKUs) ● Mounting hardware ● Quick-start guide |
| Minimum Requirements | ● Web browser: Mozilla Firefox version 8 or later; Microsoft Internet Explorer version 7 or later, Safari, Chrome ● Category 5 Ethernet network cable ● TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in the network |
| Supported Small Form-Factor Pluggable (SFP) Modules | |
| MFEFX1 | Multimode fiber, 100 Mbps, 2 km |
| MFELX1 | Single-mode fiber, 100 Mbps, 15 km |
| MFEBX1 | Single-mode fiber, 100 Mbps, 20 km |
| MGBBX1 | Single-mode fiber, 1000 Mbps, 10 km |
| MGBSX1 | Multimode fiber, 1000 Mbps, 500 m |
| MGBLH1 | Single-mode fiber, 1000 Mbps, 40 km |
| MGBLX1 | Single-mode fiber, 1000 Mbps, 10 km |
Xem thêm
THÔNG SỐ KỸ THUẬT
| Thông số kỹ thuật của Switch Cisco SF200-24FP | |
| General Information | |
| Product Name | Cisco SF200-24FP 24-port 10/100 Full-PoE Smart Switch |
| Manufacturer Part Number | SF200-24FP-EU |
| Product Series | Cisco 200 Series Smart Switches Cisco Small Business |
| Product Model | SF200-24FP |
| Product Type | Ethernet Switch |
| Interfaces/Ports | |
| Total System Ports | 24 Fast Ethernet 2 Gigabit Ethernet |
| RJ-45 Ports | 24 Fast Ethernet |
| Combo Ports (RJ-45 + SFP) | 2 Gigabit Ethernet combo |
| Each combo mini-GBIC port has one 10/100/1000 Ethernet port and one mini-GBIC/SFP Gigabit Ethernet slot, with one port active at a time. | |
| Performance | |
| Switching capacity | 8.8 Gbps |
| Forwarding rate | 6.55 mpps |
| Layer 2 Switching | |
| Spanning Tree Protocol (STP) | Standard 802.1d STP support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default |
| Port grouping | Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) ● Up to 4 groups ● Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation |
| VLAN | Support for up to 256 VLANs simultaneously (out of 4096 VLAN IDs). Port-based and 802.1Q tag-based VLANs |
| Voice VLAN | Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS |
| Internet Group Management Protocol (IGMP) versions 1 and 2 snooping | IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups |
| Head-of-line (HOL) blocking | HOL blocking prevention |
| Security | |
| IEEE 802.1X (Authenticator role) | 802.1X: RADIUS authentication, MD5 hash |
| Port security | Locks MAC addresses to ports, and limits the number of learned MAC addresses |
| Storm control | Broadcast, multicast, and unknown unicast |
| DoS prevention | DoS attack prevention |
| Quality of Service | |
| Priority levels | 4 hardware queues |
| Scheduling | Strict priority and weighted round-robin (WRR) Queue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS) |
| Class of service | Port based, 802.1p VLAN priority based, IPv4/v6 IP precedence/type of service (ToS)/DSCP based, Differentiated Services (DiffServ) |
| Rate limiting | Ingress policer, per VLAN and per port |
| IPv6 applications | Web, ping, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), RADIUS, syslog, DNS client |
| Management | |
| Web user interface | Built-in switch configuration utility for easy browser-based device configuration (HTTP). Supports configuration, system dashboard, system maintenance, and monitoring |
| Simple Network Management Protocol (SNMP) | SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 user-based security model (USM) |
| Remote Monitoring (RMON) | Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis |
| IPv4 and IPv6 dual stack | Coexistence of both protocol stacks to ease migration |
| Firmware upgrade | Web browser upgrade (HTTP) and TFTP |
| Port mirroring | Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 4 source ports can be mirrored to one destination port. A single session is supported |
| VLAN mirroring | Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 4 source VLANs can be mirrored to one destination port. A single session is supported |
| Dynamic Host Configuration Protocol (DHCP) (options 66 and 67) | (DHCP) options facilitate tighter control from a central point (DHCP server) to obtain IP address and perform auto-configuration (with configuration file download) |
| Text-editable config files | Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment |
| Smartports | Simplified configuration of QoS and security capabilities |
| Auto Smartports | Automatically applies the intelligence delivered through the Smartports roles to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero touch deployments. |
| Cloud services | Support for FindIT Network Discovery Utility and Cisco Active Advisor |
| Localization | Localization of GUI and documentation into multiple languages |
| Other management | HTTP, RADIUS, port mirroring, TFTP upgrade, DHCP client, BOOTP, SNTP, ping, syslog |
| Power Efficiency | |
| Energy Detect mode | Automatically turns off power on Gigabit Ethernet RJ-45 port when the switch detects a link down Active mode is resumed without loss of any packets when the switch detects that the link is back up |
| Cable length detection | Adjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter than 10 m. |
| Other specifications | |
| MAC table | Up to 8,000 MAC addresses |
| Bonjour | The switch advertises itself using the Bonjour protocol |
| Power over Ethernet (PoE) | |
| Power Dedicated to PoE | 180W |
| Number of Ports That Support PoE | 24 |
| Cabling type | Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5 Ethernet or better for 1000BASE-T |
| Flash Memory | 16 MB |
| CPU memory | 128 MB |
| Packet buffer: All numbers are aggregate across all ports, as the buffers are dynamically shared: |
8 MB |
| Dimensions (W x H x D) (mm) | 440 x 44 x 257 |
| Unit weight (kg) | 3.67 |
| Power | 100V-240V 47-63 Hz, internal, universal |
| Certification | UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
| Operating temperature | 32° to 122°F (0° to 50°C) |
| Storage temperature | –4° to 158°F (–20° to 70°C) |
| Operating humidity | 10% to 90%, relative, noncondensing |
| Storage humidity | 10% to 90%, relative, noncondensing |
| Package Contents | ● Cisco 200 Series Smart Switch ● Power cord (power adapter for 8-port and 10-port SKUs) ● Mounting hardware ● Quick-start guide |
| Minimum Requirements | ● Web browser: Mozilla Firefox version 8 or later; Microsoft Internet Explorer version 7 or later, Safari, Chrome ● Category 5 Ethernet network cable ● TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in the network |
| Supported Small Form-Factor Pluggable (SFP) Modules | |
| MFEFX1 | Multimode fiber, 100 Mbps, 2 km |
| MFELX1 | Single-mode fiber, 100 Mbps, 15 km |
| MFEBX1 | Single-mode fiber, 100 Mbps, 20 km |
| MGBBX1 | Single-mode fiber, 1000 Mbps, 10 km |
| MGBSX1 | Multimode fiber, 1000 Mbps, 500 m |
| MGBLH1 | Single-mode fiber, 1000 Mbps, 40 km |
| MGBLX1 | Single-mode fiber, 1000 Mbps, 10 km |
